Road Sweeper Truck for Urban Road Cleaning

Introduction

The road sweeper truck is a fully electric sanitation vehicle designed for urban road cleaning, municipal maintenance, industrial parks, airports, ports, and public facilities. Equipped with an 8 CBM water tank, 8 CBM dust tank, and a 282 KWH CATL battery system, it combines sweeping, dust suppression, curb cleaning, and flushing functions in a single platform. The vehicle features dust-free cleaning mode, high and low pressure operating modes, and curb side flushing capabilities that help maintain clean road surfaces while reducing airborne dust. Its electric powertrain supports environmentally friendly operations and provides efficient cleaning performance for extended daily service.

Road Sweeper Truck Overview

This road sweeper truck is built on a Dongfeng chassis with a 5300 mm wheelbase and automatic transmission system. The vehicle integrates sweeping, suction, flushing, and dust control functions to support comprehensive road maintenance operations.

The electric chassis is powered by a 282 KWH CATL battery pack with a rated voltage of 618.24V. Fast charging capability allows the battery to recharge in approximately 2.5 hours when paired with a recommended 120 KW charger. The chassis motor delivers a maximum power output of 160 KW, while the upper cleaning system consumes approximately 40 to 50 KWH per hour during operation.

Road Sweeper Truck with Dust Free Cleaning Mode

The road sweeper truck utilizes a dust-free cleaning mode designed to reduce dust emissions during sweeping operations. Combined with the suction and water spraying systems, this configuration helps capture dust particles before they become airborne.

For municipal authorities and sanitation contractors, reduced dust generation improves environmental conditions in densely populated areas. The system is particularly useful for city streets, commercial districts, residential communities, and public squares where dust control is an operational requirement.

The combination of sweeping and dust suppression functions allows operators to maintain cleaner road surfaces while minimizing secondary pollution during cleaning activities.

Road Sweeper Truck with High and Low Pressure Cleaning Modes

This road sweeper truck features two operating modes that can be selected according to road conditions and cleaning requirements. High-pressure mode provides stronger cleaning force for stubborn debris and heavily contaminated surfaces, while low-pressure mode supports routine cleaning tasks.

The flexible pressure settings help optimize energy consumption and improve battery utilization throughout the workday. Operators can select the most suitable mode for different environments, including urban roads, industrial zones, and logistics centers.

This adaptability increases operational efficiency and enables the vehicle to handle a wider range of cleaning applications with a single platform.

Road Sweeper Truck for Curb Side Cleaning

The road sweeper truck is equipped with curb side flushing functionality and high-quality side brushes designed to improve edge cleaning performance. Areas along curbs often accumulate dust, leaves, sand, and other debris that standard sweeping systems may not fully reach.

The side brush system directs debris toward the suction area, while curb side flushing helps loosen and remove accumulated dirt. This combination improves cleaning coverage and helps maintain cleaner road edges.

For municipal cleaning departments, effective curb cleaning contributes to improved street appearance and reduced debris buildup in drainage areas.

Road Sweeper Truck with Large Capacity Tanks

The vehicle incorporates an 8 CBM water tank and an 8 CBM dust tank to support extended operating periods between refilling and unloading cycles.

The large water tank supplies sufficient capacity for dust suppression and flushing operations, while the dust tank stores collected debris during sweeping activities. This balanced tank configuration helps maximize productive cleaning time and reduces interruptions during daily operations.

For contractors and municipal operators, larger tank capacities support efficient route planning and help improve fleet utilization across extensive cleaning areas.

Electric Road Sweeper Truck with Fast Charging Capability

Powered by a CATL 282 KWH battery pack, the vehicle offers fully electric operation for urban sanitation applications. The battery system supports fast charging with a recommended 120 KW charger, reducing charging time to approximately 2.5 hours.

The electric chassis motor delivers up to 160 KW of power, supporting both vehicle movement and cleaning operations. The upper cleaning system consumes approximately 40 to 50 KWH per hour, allowing operators to manage energy use based on working conditions.

Electric operation reduces local emissions and supports environmental objectives in cities transitioning toward cleaner public service fleets.

Applications

This road sweeping vehicle is suitable for:

• Municipal road cleaning
• Urban street maintenance
• Residential community cleaning
• Industrial park sanitation
• Airport roadway cleaning
• Port and terminal maintenance
• Logistics center cleaning
• Commercial district sweeping
• Public square cleaning
• Campus road maintenance

Optional Configurations

The following configurations are available based on the provided information:

• High-pressure cleaning mode
• Low-pressure cleaning mode
• Dust-free cleaning mode
• High-quality side brush system
• Curb side flushing system
• 120 KW fast charging system

FAQ

What is the water tank capacity of this road sweeper truck?

The vehicle is equipped with an 8 CBM water tank for dust suppression and flushing operations.

What is the dust tank capacity?

The dust collection tank capacity is 8 CBM, supporting extended cleaning operations before unloading.

How long does battery charging take?

Using the recommended 120 KW charger, charging time is approximately 2.5 hours.

Can the vehicle operate in different cleaning modes?

Yes. The vehicle provides both high-pressure and low-pressure cleaning modes as well as a dust-free cleaning mode for different operating conditions.

Conclusion

This road sweeper truck combines electric mobility, dust-free cleaning capability, dual-pressure operation modes, curb side flushing, and large-capacity tanks in a single sanitation platform. The 282 KWH CATL battery system, 160 KW chassis motor, and 8 CBM water and dust tanks support efficient municipal and industrial cleaning operations. With flexible cleaning configurations and fast charging capability, this road sweeper truck is suitable for a wide range of road maintenance applications. Contact us for detailed specifications, customization options, and export information.

Product Specifications